点击图片查看原图
- 产品型号：CA系列
- 产品规格：
- 原 产 地：
- 适用范围：◆ Recommended substrate: Harden PC, harden PMMA, the surface of UV coating, electroplating layer, stainless steel, stone, marble, glass, etc. ◆ Recommended for: Windows screens, the phone keypad, the phone shell, the metal products, the stone crafts, the glass products, etc. ◇ 适用基材：加硬PC，加硬PMMA，UV漆面，电镀面，不锈钢，石头，大理石，玻璃等 ◇ 推*用途：视窗屏，手机按键，手机壳，金属制品，石头工艺品，玻璃制品等
- 详细描述：ALABINE CA series inks, which based on special mixed resins, are of multi-functional features and use widely. These series inks with good adhesion are scratch resistant, alcohol resistant, sterilization resistant and anti-static
ALABINE CA系列油墨采用了特种混合树脂，具有多功能特点，应用范围广。该产品附着力好，耐磨抗刮，耐酒精，耐蒸煮，防静电。
Prepare: To clean the surface with ALATIVE SC5 treater （ALATIVE SC23 treater for the metal products and the glass products） and make sure non-dust, non-grease. To dilute the mixture with 3-20% ALATIVE SR6 thinner and then is ready（In order to regulate the drying rate of ink ,please make use of ALATIVE RR6 dry retarder or ALATIVE SF3 dry accelerant）. Mix the ink with the ALATIVE SA5 (10-15%, to total) activator completely (15-25% ALATIVE SA6 activator for the metal products and the glass products).
Mesh count: 70T to 180T
Drying: Air dry in 12-18 hours, or forced dry at 80 OC in about 40 minutes.
Cleaning: To remove the stain and bad print with ALATIVE SC6 remover, and to clear the screen plate with ALATIVE CC6 cleaner.
印前：用ALATIVE SC5清洗印件表面（金属制品和玻璃制品，则用ALATIVE SC23），确定无尘、无油脂；用3-20%的ALATIVE SR8将产品稀释至需要稠度，即可印刷（调节油墨干燥速度，可以配合适量的ALATIVE RR6或ALATIVE SF3）；添加10-15%（对总量）ALATIVE SA5活化剂（金属制品和玻璃制品时，则用15-25%的ALATIVE SA6活化剂），与油墨充分混合，即可。
网纱：70T至180T
干燥：自然风干，12至18小时；或70OC烘干，约45分钟。
清洗：用ALATIVE SC6清除污点和不良印刷；用ALATIVE CC6清洗网板。
- 售后服务：
