主要技术参数Main specifications
|
最大送纸尺寸(mm)
|
900×2000
|
隔张进纸尺寸(mm )
|
1100×2000
|
|
最大印刷尺寸(mm)
|
880×2000
|
最小进纸高度(mm )
|
260
|
|
最小开槽间距(mm)
|
正刀
|
145×145×145×145
|
最大开槽深度(mm )
|
225
|
|
反刀
|
230×60×230×60
|
机械最高速度(pcs/min)
|
180
|
一、前缘送纸部
1、进纸前缘定位，调近代风量，增速更平稳。
2、增加薄纸板及翘曲纸板传送稳定性。
3、左右侧档板、前挡板、电动位移；吸尘风机除屑更彻底。
4、隔张送纸功能，计数器显示生产数量，计速器显示生产速度。
1. Lead edge feeder (bell type),Suction force-hold-down device to aid the feeding of wraooed-board.
2. Special design for the thin sheet.
3. Left & right side feed gate movement are moto-rized adjust.Equiooed with powerful helicoidal duster.
4. Skip feed for large sheet.Electric counter to indicate production volume,speeder to display the machine working speed.
二、印刷部
1、印版辊周向数显位移，自动复位，调整快速、准确。
2、缺墨报警，网纹辊自动空转装置，防止油墨干涸。
3、优质合金钢、渗碳淬火研磨齿，精密传动，寿命长。
4、传动辊动平衡校正，传动更平稳，确保传动精度。
1.360’register is motorized adjust with digital display.it can be adjusted when the machine is running or stop.With auto return to zero.
2.Lack ink alarm.Automatic anilox rolls engagement and disengagement to avoid ink attain it,and to prevent the damage on the flexo plate
3.Precise planet-gear to ensure the machine with fine register and long life.
4.The conveying rolls have been running-balance checked.
三、开槽部
1、预压传送，防止纸板压破现象。
2、采用新型导向系统，移位更平稳，更精确。
3、储存订单量大，可储存999个，节省时间，提高工效。
4、独特的弹屑式除屑装置，降低成本，寿命长。
1. Pre-creasing wheel to prevents crushing board.
2. New type guide system for the creaser heads and slotter heads more smoothly moving.
3. Total 999 orders can be preset or memorized by computer.
4. Adopt spring-bar waster removing device to save cost.
四、模切部
1、精密行星齿轮相位调节机构。
2、模切压力，电动数显调控。
3、胶垫辊自动横向40MM游动装置。
4、进口快换式胶垫，耐磨。
5、速差补偿机械，延长胶垫寿命，提高模切精度。
6、电动车削胶垫机械，回复修正方便。
1. Precise planet-geared circumference setting.
2. Motorized adjusting the pressure.
3. Lateral oscillating movement is 40 MM
4. Quick change anvil blankets(from USA).
5. Mechanical differential compensation device.Prolongs the life of anvil blankets and proves die cut quality.
6. Motorized tuming anvil blankets device ensures quick reset and compensation.